In order to maintain the health of your Spinfire ball machine you can vacuum out the inside of your machine to remove ball fluff. The outside of the machine can be wiped down with a mild detergent. However, please be careful not to get water inside the machine. The throwing wheels should be wiped down after every use to prevent any buildup of residue from the balls. If you play on a porous surface like clay or en tout cas, we recommend you wipe the insides of your throwing wheels monthly (a build up of clay can cause your wheels to become unbalanced).
Due to vibrations, the screws in the control panel and on the base of the machine can become loose over time, so please check these regularly and tighten them if required. If you do need to purchase replacement control panel screws from the local hardware store, they are 304 Stainless Steel Phillips Head screws, M4 x 10mm with a 9mm head diameter. You can contact your local Spinfire distributor for spare parts if you need them.