Machine will only turn to the right

Sometimes the machine will only shoot to the right (when standing behind the machine, looking forward). It may even shoot inside the purple case.

This issue is caused by a fault with the horizontal sensor (it may simply have become unplugged through vibrations). To resolve this issue temporarily, please start your machine in “manual mode”.

To start your machine in manual mode, please watch the following video:

This process will override the calibration process and your sensors will not need to be used in the start up process.

If your machine still shoots to the right, it is likely the issue is more complicated and we recommend contacting your local Spinfire distributor for servicing.